Northern Rivers NSW

Part of our handyman and carpentry work.

Shelf and rack installation in the Northern Rivers

Shelving stays up when it is fixed into studs or rated anchors, so the load is worked out before the fixing is chosen. Homesmith installs floating shelves, bookshelves, coat rails, towel rails and garage racking across Alstonville, Wollongbar and the Ballina plateau.

Everything is laser levelled, and it stays level after we have gone.

Send the job list and we tell you how many days it looks like. Time left over goes to whatever else you point at.

Booked as a day. Hardware charged separately.

12 month workmanship guarantee · Fully insured · The place left cleaner than when we arrived

What's included

Every shelf and rack installation booking covers

  • Floating shelves fixed into studs or with rated cavity anchors
  • Bookshelves and modular shelving, levelled and anchored
  • Coat rails, hooks, pinboards and towel rails
  • Garage and laundry racking, including heavy storage
  • Load checked before the fixing is chosen
  • Cable and pipe checked before drilling, holes cleaned up after

Detail

How we fix shelves

Most shelves that sag were installed in the wrong order, with the hole drilled before the fixing was chosen. We start with the load, then find the framing.

Plasterboard is fine for light work as long as the anchor is rated for it. Anything heavy gets fixed to a stud, or to a timber cleat spanning two of them.

Plenty of older Northern Rivers homes are hardwood framed, and hardwood splits if you rush it, so those get pre drilled.

Near the coast, salt air makes short work of plated hardware. Exposed rails and garage racking get corrosion resistant fixings.

Where we work

Shelf and rack installation across the Northern Rivers

We cover Byron Bay, Bangalow, Lennox Head, Alstonville, Ballina, within roughly a 50km radius of Byron Bay. Same prices everywhere, no call out fee.

Common questions

Shelf and rack installation questions we get asked

How much does shelf installation cost?

Pricing is $420 + GST for a half day or $760 + GST for a full day, for one smith. It is worth saving several shelves up for the one visit rather than booking them one at a time.

Can you put floating shelves on plasterboard?

Yes. Light shelves go in with rated cavity anchors. Heavier ones get a timber cleat or fixings into the studs, depending on the load.

Do you supply the shelves?

Bring your own, or we can source them and charge at cost.

Will the shelves be level?

Laser levelled, and checked against the room rather than the ceiling, because plenty of older houses are not square.

How does pricing work?

Send the list and we will tell you whether it is a half day or how many days it looks like, from $420 + GST for a half day or $760 + GST for a full day, for one smith, fixed before we start. If there is time left over, we keep working down whatever else is on your list.